Task Group 142 describes table sag as a maximum vertical drop of 2 mm. This is a linear distance limit, not an angle or a plus-or-minus range. Understanding the distinction helps clarify how radiotherapy equipment tolerances describe table position and mechanical performance.

Multiple Choice

Which tolerance relates to the table sag, stated as 2 mm?

Tolerances in this context are about how much a feature is allowed to deviate in a straight-line distance. When the sag of the table is stated as 2 mm, that means the only allowance is a maximum vertical drop of 2 millimeters from level, a single distance limit rather than a bidirectional range or an angle. That’s why the plain 2 mm best expresses the requirement: it defines the maximum vertical displacement directly. A bidirectional tolerance like ±2 mm would imply sag could go 2 mm up or down, which isn’t what's specified; an angular tolerance (1°) isn’t relevant to a linear sag; and a smaller bilateral tolerance such as ±0.5 mm would contradict the given 2 mm limit.

A treatment table may look like a solid, motionless platform, but it can bend slightly under its own weight and the load it carries. That small downward movement is called table sag. In the context of Task Group 142 (TG-142) tolerances, the stated limit for table sag is 2 mm: a maximum vertical drop of two millimeters from the reference level.

That number is a distance, not an angle, and it isn’t automatically a plus-or-minus range. The distinction matters. A tolerance tells a team how far a measured feature may depart from its intended position before it falls outside the stated limit. For table sag, the feature of interest is the table’s vertical displacement as it deflects.

What table sag means

A medical linear accelerator’s treatment table supports the patient and moves to help position them for radiation delivery. Although the table is designed to be stable, no structure is perfectly rigid. Under load, it may flex a little. The resulting vertical change is table sag.

Imagine holding a long ruler at one end while placing a small weight near the other. The free end may dip. A treatment table is far more robust, of course, but the basic idea is similar: a supported surface can change shape under load. The amount of that change can depend on the table’s design, its position, and how weight is distributed.

The word sag points to a particular kind of movement: a downward displacement. So when the tolerance is stated as 2 mm, it describes the permitted amount of vertical drop. It does not say that the table may also rise by the same amount. Nor does it describe a tilt in degrees. It gives a linear distance limit.

Why “2 mm” is not the same as “±2 mm”

These values can look nearly interchangeable at a glance, but they mean different things.

A plain 2 mm limit describes a maximum amount of sag. The measurement is judged against that one-sided limit: the table’s downward displacement should not exceed 2 mm.

By contrast, ±2 mm describes a bilateral range. It allows deviation in either direction—2 mm above or 2 mm below a reference point. That kind of notation fits a measurement where movement on both sides of a target is meaningful. But “sag” refers to downward deflection, so adding a plus sign can change the meaning of the requirement.

This is more than a formatting detail. In equipment quality assurance, the wording of a tolerance helps define what should be measured and how the result should be interpreted. A vague or altered sign can make a clear physical limit harder to apply. If a value is meant to describe a maximum drop, writing it as a one-sided distance keeps that intent visible.

Why an angle doesn’t describe sag

An angular value, such as 1°, measures rotation. It tells us how much something turns, not how far it moves vertically.

The two quantities are related in some situations. For example, a tilted surface can cause one end to sit higher than the other. But an angle alone does not specify the vertical drop at a given point unless the distance over which that angle acts is also known. A one-degree tilt across a short span produces a different height change from the same tilt across a much longer span.

That’s why millimeters are the natural unit for a sag tolerance. They describe the displacement directly. The unit matches the physical effect being discussed, which makes the requirement easier to understand and compare with a measurement.

Why a smaller number can still be wrong

A value such as ±0.5 mm may sound stricter because it is smaller than 2 mm. But a stricter-looking number is not automatically the right one. A tolerance must reflect the stated requirement, including its direction and measurement type.

Here, ±0.5 mm would introduce two changes. It would make the permitted amount smaller, and it would define a two-sided range rather than a maximum downward drop. That is not simply a more careful version of the same limit; it describes a different condition.

In equipment quality work, precision isn’t just about choosing the smallest number. It’s about using the number that matches the physical feature and the specification. A tight tolerance can be useful when it is supported by the relevant standard and measurement method. Taken out of context, though, it can cause confusion rather than improve accuracy.

Why a few millimeters matter

Two millimeters may sound tiny. On a ruler, it’s easy to miss. But the position of a patient during radiation treatment is a geometric concern, and small shifts can matter when the equipment, imaging system, and treatment plan must work together.

Table sag is one part of a broader picture of mechanical accuracy. A treatment unit has moving components, calibrated reference points, and systems that must place the patient and radiation beam in the intended relationship. If the table changes height as it moves or bears a load, that movement is worth measuring and tracking.

This does not mean that every two-millimeter change has the same clinical effect in every situation. The significance of a measurement depends on the equipment, the measurement conditions, the location on the table, and the applicable quality assurance program. TG-142 provides a framework for checking aspects of medical linear accelerator performance; local procedures and the equipment manufacturer’s guidance also matter. The number should be understood within that full context, not treated as a stand-alone guarantee.

Measurement depends on a clear reference

A sag value only makes sense when the reference is clear. A team needs to know what “level” means for the measurement, where the table is being checked, and under what loading conditions. Without those details, two measurements may look different simply because they were taken in different ways.

This is a familiar issue in many technical fields. Measuring a shelf’s bow, a bridge’s deflection, or a machine bed’s movement requires a stable reference and a defined point of comparison. The instrument matters, too, but so does the method. A precise reading taken from an unclear reference can still lead to a poor conclusion.

For that reason, quality assurance programs usually pair numerical tolerances with defined measurement methods, records, and review steps. Results can then be compared over time. A reading near the stated limit may call for closer attention, even if it remains within the limit. A change from earlier measurements may also be worth investigating, because a trend can tell a useful story before a value crosses a threshold.

The simple reading

For table sag, 2 mm means a maximum vertical drop of two millimeters from the reference level. It is a one-direction distance limit. It is not a ±2 mm range, because that would allow movement in both directions, and it is not an angular tolerance, because an angle measures rotation rather than vertical displacement.

That plain reading is useful precisely because it keeps the physical idea intact: the table may deflect downward, and the permitted sag is expressed as a direct distance. In equipment quality assurance, clear units and clear direction turn a small number into a meaningful standard.